UNIVERSAL120 COMBO

INFORMATIONS

• Fill 5 different capsule sizes.

• You can choose freely among sizes 000, 00, 0, 1, 2, 3 and 4.

HOW TO USE

Video demonstration 

1. Prepare your material: choose the right set of plates for the capsule size you are using. Install the plates
in this order: Spacer plate, Bottom Plate, Filling Plate, Top Plate.

2. If you have a capsule Loader, please refer to the Loader datasheet for instructions. If you do not have a capsule Loader, place the capsules into the Top Plate one by one.

3. Pull the Lever to lock the capsules’ bodies.

4. Pull the Top Plate upwards, starting from the back side for easier separation.

5. Release the Lever. If needed, push on the capsules’ bodies so that they are flush with the Filling Plate.

6. Fill the capsules. You can move the side locks to have more space to spread the power. You can also use the Modular Powder Stop to prevent powder loss or to fill less than 120 capsules.

7. If needed, you can use a Tamper to push the powder into the capsules to be able to fill a higher volume.

8. Place the Top Plate. Pull the Base Plate to push the capsules’ bodies into the capsules’ heads. The capsules are now “pre-closed”.

9. Take the Top Plate and turn it upside down on your table. If you have a Serial Closer, use it to close the capsules in one motion. If not, close the capsules by hand.

10. To push the capsule out of the top plate, open the lid and place the top plate on a spacer plate.

BENEFIT OF THIS CAPSULE FILLER

• One single frame for all capsule sizes.
• Only metallic plates and frame.

• Fill capsule sizes 000, 00, 0, 1, 2, 3 and 4.

• No adjustment necessary.

• 120 capsules at a time.

• Possibility to fill less capsules with the Modular Powder Stop.

• Extra space to fill the capsules.

• Very robust design.

• Easy to clean.

Don't forget to specify which capsule sizes you need when you order.

DIMENSIONS AND WEIGHT: 
Dimensions: 
Length: 255 mm
width: 241 mm
height: 70 mm

Weight:

Weight (frame + plates set): from 5,8 kg (size 000) to 6,3 kg (size 4).

HOW TO CLEAN: 

It is important to wash the parts in contact with the capsules or the powder thoroughly between each use to avoid contamination. Washing can be done by hand, in a dishwasher or in an autoclave.

If done by hand, use warm water and soap.

If done in a dishwasher :

- All metal parts : Use a maximum temperature of 110°C/230°F.

- All plastic parts : Use a maximum temperature of 40°C/104°F.

If you have difficulty cleaning the inside of the holes of the plates, use the small Feton-cleaning brush.

Note for aluminium parts with Durni-coat 520 Nickel treatment : top plates, Universal frame

If done in a dishwasher or in an autoclave, do not use alkaline or acid cleaning product that are not suitable for treated aluminium (nickeled or anodized), as they oxidize the surface treatment of the plates which could deteriorate or change color.

Example of unsuitables products :

- Alkalines : Alkaline detergent

o For anodized parts not suitable for ph > 7

o For nickel plated parts alkaline is suitable

- Acids : Hydrogen peroxide

o For anodized parts not suitable for ph < 4

o For nickel plated parts not suitable for ph <7 In general, use cleaning products whose ph is neutral.

Please refer to the technical datasheet of your cleaning product to check whether it is suitable or not.

ORDER NOW :

contact@feton.com order via our contact form.

With a dynamic R&D department, we are ready to fulfill your special requests.